Regain the millimeter precision of your motorcycle with the ProX Steering Rebuild Kit, the ultimate solution for eliminating mechanical play and steering stiffness. When the handling becomes imprecise or you feel a “notch” at the center of rotation, rider safety is compromised. ProX Racing Parts has developed this set to offer superior smoothness and resistance to the impacts typical of motocross and enduro.
Why choose ProX tapered roller bearings
Unlike standard ball bearings, this kit uses Tapered Bearings technology, designed to distribute the load over a larger surface area. This geometry allows it to withstand high radial and axial stresses, ensuring superior durability and impeccable directional stability even on the roughest terrain.
Technical Features and Materials
● Built with high-precision heat-treated steel to minimize friction.
● Includes two tapered roller bearings (upper and lower) designed for a perfect fit.
● Supplied with specific Dust Seals that prevent the entry of water, mud, and debris, preserving internal lubrication.
● Anti-corrosion surface treatment to withstand frequent washing and adverse weather conditions.
The importance of steering maintenance
An improperly adjusted or worn steering system not only makes the motorcycle unstable but can cause permanent structural damage to the seats in the frame. Replacement with this kit completely regenerates the front-end feel, eliminating vibrations and improving corner entry.
Assembly and Usage Guide
Assembly must be carried out by specialized personnel, following the motorcycle manufacturer’s instructions. During installation, it is essential to use specific high-resistance lithium grease and tighten the adjuster nut without exceeding the preload, ensuring that rotation occurs without binding. Once the top triple clamp is tightened to the correct torque, the steering should fall smoothly from one side to the other under its own weight.
Who is ProX Racing Parts
ProX is a global leader in racing components, known for producing replacement parts that often exceed original equipment manufacturer (OEM) specifications. Every part is manufactured in the facilities of the world’s leading original equipment suppliers, ensuring the highest quality standards.
The Crosshop staff remains at your disposal for any further clarification, do not hesitate to contact us.
FAQ – ProX Steering Bearing Kit
How can I tell if my steering bearings need to be changed?
Lift the motorcycle on a center stand: if you feel resistance at the center of rotation or if, by shaking the fork back and forth, you feel mechanical “play”, it is time to replace them.
Does the kit include everything needed for the replacement?
Yes, the set includes the pair of tapered bearings and the relative dust seals necessary to isolate the system from external agents.
Are these bearings better than the original ones?
ProX bearings are often made with higher precision standards or more resistant materials compared to the original equipment ball bearings of many models, offering greater longevity.
Is it difficult to install steering bearings?
The difficulty is medium/high. It requires extracting the old races from the frame and press-fitting the new ones. We recommend the assistance of an expert mechanic to avoid damage to the frame.
Can I use the old dust seals if they seem intact?
It is strongly discouraged. The dust seals included in the ProX kit are designed to work in synergy with the new bearings, ensuring maximum protection.