Optimize Performance with the Main Jets for Keihin Carburetors: Millesimal Precision
If your bike isn’t responding as it should or if you’ve just installed a racing exhaust or a new reed valve, carburetor tuning is the crucial step to unleash the engine’s true power. This flow calibrator is designed specifically for those who demand the maximum from their Keihin fuel system, ensuring flawless air-fuel mixture adjustment in every climatic and altimetric condition.
Technical Specifications and Build Quality
The hallmark of our main jets is the extremely high manufacturing precision. Every component undergoes millesimal control over the measurement of the passage hole. This accuracy ensures that the nominal value engraved on the jet corresponds exactly to the real flow rate, avoiding the fluctuations typical of cheap products that make the idle unstable or the top-end uncertain.
Carburetion Dynamics and Use
This main sprayer acts on the carburetion mainly from the last three quarters of the throttle opening up to full revs, while also perceptibly affecting medium openings.
● Increasing the size (richening): increases the amount of fuel, ideal for cold climates, low altitudes, or after heavy mechanical modifications.
● Reducing the size (leaning): decreases the fuel intake, a necessary operation when gaining altitude (mountains) or with high ambient temperatures.
Keihin Compatibility
This component is interchangeable with the original and is compatible with a wide range of models, including:
● FCR-MX, PD22, PE20, PE26, PE28, PE30
● PJ34, PJ36, PJ38
● PWM 34, PWM 36, PWM 38
● PWK 28, PWK 33, PWK 35, PWK 38, PWK 39
● PWK Quad Vent and PWK Air Striker
Symptoms for a Correct Diagnosis
Identifying the correct jet is fundamental for engine operation:
● Jet too large (Rich): The engine struggles to start when hot, sputters, and “bogs,” failing to rev up cleanly at full throttle.
● Jet too small (Lean): The engine runs cleanly but lacks maximum thrust. Under stress (mud or sand), it may exhibit dangerous “knocking.” Warning: an excessively lean carburetion leads to overheating and the risk of seizing.
Advantages Compared to Standard Products
Unlike unverified universal spare parts, our jets ensure a consistency of performance that protects the investment made in your bike. The internal surface finish is designed to reduce flow turbulence, ensuring optimal atomization.
Fitting Advice
Fitting is of medium difficulty and should preferably be performed by specialized personnel. Access to the carburetor bowl is required after closing the fuel petcock. It is recommended to always follow the manufacturer’s setting charts as a starting point.
Warnings
Remember to always recalibrate the bike if you change altitude or fuel type. The Crosshop staff remains at your disposal for any further clarification, do not hesitate to contact us.
Made in Taiwan