The carbon fiber front sprocket guard by CMT Compositi offers greater protection by allowing better expulsion of debris that could accumulate between the sprocket and chain, thus ensuring improved safety. In addition to its remarkable resistance, this product has been designed to give your bike an appealing and customized racing look.
The technological evolution, the innovation of production methodologies, and the KNOW-HOW acquired through constant study and craftsmanship are the keys to the approach that led to the affirmation of the CMT company in the motorcycle and design sectors.
Why Buy It and Advantages Compared to Others
This protection element outperforms stock plastic or aluminum components thanks to an unbeatable strength-to-weight ratio. Choosing this guard means preserving the integrity of the crankcase area surrounding the transmission shaft, avoiding catastrophic failures in the event of a chain breakage or due to the impact of foreign bodies. Unlike an original closed casing, its open geometric shape promotes the evacuation of heavy mud during track sessions or extreme routes, reducing premature wear of the transmission group and facilitating washing operations at the end of the day.
Materials and Production Technology
The excellent quality level is guaranteed by the use of aerospace-derived composites. The structure of the protective shell is made with a calibrated layering of advanced materials:
● 2 layers of pre-preg carbon with Hexcel Hexply M49 600g/sqm epoxy matrix, which constitutes the structural fabric used in very high-performance racing cars to absorb impacts.
● 1 layer of pre-preg carbon with Hexcel Hexply M52 200g/sqm epoxy matrix for the superficial aesthetic finish.
The industrial process involves curing in an autoclave at high pressure and temperature. This process eliminates every air microbubble between the fibers, guaranteeing maximum structural compactness with the minimum possible weight.
Finish and Craftsmanship Quality
The surface is mirrored and shiny. This shiny surface finish is achieved through direct polishing of the epoxy resin during the molding phase, without the use of clear coats that could yellow over time due to engine heat or peel under the action of stones. Every single piece is finished by hand by the brand’s specialized technicians to ensure perfect geometric couplings and the absence of sharp burrs.
Instructions and Assembly Difficulty
The component is easy to assemble and installs directly on the original engine mounting points using the stock bolts or those included in the package, depending on the specific motorcycle model. No modifications to the crankcase or structural changes are required. However, the staff always recommends that assembly be performed by specialized personnel, following the motorcycle manufacturer’s instructions to ensure correct tightening torques and avoid damage to the engine block threads.
Warnings: Periodically check the tightness of the fixing screws after the first hours of off-road use, as constant engine vibrations could loosen them.
The Crosshop staff remains at your disposal for any further clarification, do not hesitate to contact us.
FAQ – CMT Carbon Front Sprocket Guard
Does this carbon guard resist the heat of the engine crankcase?
Yes, the Hexply epoxy resin used perfectly resists the high operating temperatures of the engine block without deforming or losing its shine.
Does the configuration of the piece accumulate mud around the front sprocket?
No, the geometric shape is specifically designed to allow better expulsion of debris and mud compared to the original closed component.
What happens if a stone hits the shell at high speed?
The 600g/sqm structural carbon fabric absorbs and distributes the impact energy, preventing breakthrough and protecting the underlying crankcase.
Are the bolts for mounting on the bike included?
Where necessary for correct installation, the specific bolts are included in the package; otherwise, the stock screws are used.
Does the glossy finish get ruined when washing the bike with a pressure washer?
The polishing of the resin is not affected by high-pressure washing, but it is recommended not to use acidic or overly aggressive detergents.