Total Seal and Maximum Reliability for Your Engine
During an engine overhaul or after many hours of track and off-road riding, original oil seals tend to lose elasticity, harden, and deform under continuous heat, radial friction, and contact with lubricants. A worn oil seal causes more than unsightly external leaks; it compromises the mechanical integrity of your machine: on two-stroke engines, air leaks through crankcase seals dangerously lean out the fuel mixture leading to piston seizure; flywheel-side leaks saturate the stator causing ignition failure; and water pump seal failure leads to harmful oil-coolant emulsion in the transmission. Athena engine oil seals eliminate these risks at the source, delivering a durable, leak-free seal across the entire crankcase.
Why Choose the Athena Oil Seal Kit
● OEM-matching or superior quality: Engineered to meet or exceed OEM dimensional tolerances and operational reliability standards.
● High-performance elastomer compounds: Made with premium NBR and FKM fluoroelastomer polymers formulated to withstand extreme heat cycles, internal crankcase pressure, and aggressive synthetic racing oils.
● Dual-lip protection and low friction: The main sealing lip with steel garter spring maintains fluid retention with minimal parasitic drag, while the outer dust lip blocks mud, sand, and water ingress typical of off-road conditions.
● Complete bottom-end overhaul kit: Contains all required oil seals for the crankshafts, transmission, counter shaft seal kit / sprocket shaft, shift drum or shift levers, and water pump on liquid-cooled models. Does not include valve stem seals, which are supplied separately.
● Over 40 years of expertise: Engineered by Athena, global leader in powersports engine components and OEM supplier to leading motorcycle manufacturers.
Installation Guidelines and Technical Notes
Installation must be performed by a qualified technician in accordance with the motorcycle manufacturer’s service manual. Thoroughly clean all crankcase seal bores prior to installation and inspect shafts for burrs, scoring, or sharp edges that could tear the elastomer. Apply a light coat of assembly grease to the inner sealing lip and drive the seal squarely into place using a dedicated seal driver or socket matching the outer diameter; never use screwdrivers or sharp tools. Printed manuals are not included in the package; always refer to the specific OEM workshop manual for your model.
FAQ – Athena Engine Oil Seals
What exactly is included in this oil seal kit?
The kit includes all oil seals required to rebuild the engine bottom end: crankshaft oil seals, transmission shafts, shift levers, clutch actuation shaft, and water pump seals for liquid-cooled engines. Valve stem seals are not included.
Do Athena oil seals match OEM dimensions and tolerances?
Yes, every seal is engineered to exact metric dimensions to ensure a precise press fit in the original crankcase bores.
What materials are used in these seals?
High-grade NBR nitrile and FKM fluoroelastomer compounds paired with steel garter springs, engineered to resist high heat, fuel mixtures, and continuous friction.
Are installation instructions included?
No, printed instructions are not included. Please refer to your motorcycle manufacturer’s factory service manual.
How can I prevent damaging the seal lip during installation?
Cover shaft splines, steps, or keyways with protective tape or a bullet tool, lubricate the sealing lip with suitable grease, and press the seal in squarely using a flat-faced driver tool.
The Crosshop team is always on hand if you have any questions—feel free to reach out.